Steel – 5.8 (galvanized zinc);
Stainless steel – A1; A4-70; A4-80;
Copper;
Inch thread
| d | М6х1 | М8х1 | М10х1 |
| hmax | 21 | 21 | 21 |
| l1 | 5.5 | 5.5 | 5.5 |
| l2 | 10 | 10 | 11 |
| b | 10 | 10 | 10 |
| s1 | 7 | 9 | 11 |
| s2 квадрат | 9 | 9 | 11 |
Press oil DIN 71412 B with the angle of inclination between the threaded and filling part is 45 and 67, corresponds to the GOST 19853-74 standard.
The oil corner consists of two parts fastened either by threading or by pressing, the first of them has a conical threaded hole with different diameters, the other is a hole through which, with the help of a special syringe, lubricant is supplied.
To install the DIN 71412B oil press, it is not necessary to make great efforts, since the hardware is not designed for significant mechanical loads. For this purpose, there is an angle wrench with which the oil pan is screwed.
DIN 71412B oil press is used as part of pump structures and bearings that require the use of lubricants in the fields of mechanical engineering and automobile manufacturing.
Carbon steel with zinc coating, copper, brass and stainless steel are used as materials for the manufacture of oil pans.
Analogue of DIN 71412 angled 45° oil press:
GOST 19853-74 – angular oil presses, intended for individual supply of plastic lubricants and lubricants to friction units of machines and mechanisms in operating conditions 1-8 according to GOST 15150.
Marking
d – nominal thread diameter
h – the height of the oil press
l1 – the height of the threaded part
l2 – the overall size of the oil press
b – the height of the square body
s1 – the size of a turnkey hexagon
s2 – turnkey square size