Aluminum/stainless steel A2
The HAMMER rivet, or hammer rivet, as it is also known, is specially designed for joining hard materials, such as metal profiles to the surface of a roof or wall.
This type of pull-out rivet is often used in the construction industry for fastening moldings, plates, insulation and roofing materials with both through and blind holes.
Install the HAMMER rivet with the rod in a pre-drilled hole (the hole length should be 5.3 mm longer than the rivet length) using force, any impact tool. Thus, the end of the rivet body is divided into 4 parts, cutting into the walls of the materials to be fastened. The rivet is pulled out and does not require a riveter. Painted or enameled surfaces do not deform during the installation process.
The shape of the HAMMER rivet head is enlarged with a diameter of 16 mm. The choice of rivet rod length (from 9 to 50 mm) depends on the thickness of the materials to be joined. A table with dimensions is available on the website of Eurobolt Ukraine https://www.eurobolt.com.ua. The body of the rivet is made of aluminum, and the core is made of A2 stainless steel, which allows the rivet to be used in environments with high humidity.