This type of fastener got its name “screw with a ring” due to its design: at one end it is a stud with a screw thread, at the other end it is a ring.

The material used to make the ring screw is hardened carbon steel. The top of the product is coated with zinc to protect it from corrosion. The screw is bent from a steel wire, with the bend itself having the correct geometric shape in the form of a closed ring. The ring screw is used to work with lightweight rigging devices. It is also used when laying cables and fixing lights. In the construction industry, such a screw is often used to fasten scaffolding to a building facade. The ring screw is not suitable for fastening large objects with the ring facing down. In this case, the load acts on the thread. As a result, suspended objects can simply fall off. Therefore, the ring screw is not suitable for hanging heavy chandeliers and other heavy objects. Such screws are selected depending on the type of material to be fastened, the expected load, and the construction. The dowel is selected depending on the depth of the screw, and its diameter should be equal to the screw’s cross section. The principle of installing a ring screw is similar to that of other screws.

The attachment algorithm is as follows:

• First, a hole is drilled
• A brick, concrete or stone or wooden wall is usually used as a working surface
• Next, debris is removed from the surface
• Then a plastic dowel is installed
• And finally, a screw is screwed into place

Prices for ring head screws depend on the size of the product. You can buy screws with a ring in bulk from Eurobolt Ukraine LLC by submitting an application to our managers by phone or e-mail.